Chery Spms V1 1 1 Setup
Click Here > https://ssurll.com/2tzBxD
What is Chery spms v1 1 1 setup and how to use it
Chery spms v1 1 1 setup is a software program developed by Chery, a Chinese automobile manufacturer. It is used to diagnose and repair Chery vehicles, as well as to update their software and firmware. Chery spms v1 1 1 setup is compatible with Windows operating systems and requires a USB cable to connect to the vehicle's OBD port.
In this article, we will explain what Chery spms v1 1 1 setup can do, how to download and install it, and how to use it to perform various tasks on your Chery vehicle.
What can Chery spms v1 1 1 setup do
Chery spms v1 1 1 setup is a comprehensive tool that can help you diagnose and fix problems with your Chery vehicle, as well as update its software and firmware. Some of the features of Chery spms v1 1 1 setup are:
Read and clear fault codes from various systems, such as engine, transmission, ABS, airbag, etc.
View live data and freeze frame data from sensors and actuators.
Perform actuator tests and adjustments.
Reset service intervals and maintenance reminders.
Update the software and firmware of the vehicle's ECU, TCU, BCM, etc.
Calibrate steering angle sensor, throttle position sensor, etc.
Program keys and immobilizer.
How to download and install Chery spms v1 1 1 setup
To download and install Chery spms v1 1 1 setup, you need to follow these steps:
Go to the official website of Chery (https://www.cheryinternational.com/) and register an account.
Login to your account and go to the download section.
Find the link for Chery spms v1 1 1 setup and click on it. You will be redirected to a third-party website (urluso.com) where you can download the file.
Save the file (Chery-SPMS(V1.1.1)setup.exe) on your computer and run it as administrator.
Follow the instructions on the screen to complete the installation process. You may need to restart your computer after the installation.
How to use Chery spms v1 1 1 setup
To use Chery spms v1 1 1 setup, you need to follow these steps:
Connect your Chery vehicle to your computer using a USB cable. Make sure the ignition is on but the engine is off.
Launch Chery spms v1 1 1 setup on your computer and select your vehicle model and year.
Select the system you want to diagnose or update from the menu.
Follow the instructions on the screen to perform the desired task. You may need to enter some information or confirm some actions during the process.
When you are done, disconnect your vehicle from your computer and turn off the ignition.
Note: Before using Chery spms v1 1 1 setup, make sure you have a stable internet connection and a fully charged battery on your vehicle. Do not interrupt the process or turn off your computer or vehicle while using Chery spms v1 1 1 setup. Doing so may cause damage to your vehicle or its systems. 061ffe29dd